Front Side Door Lock Replacement for Pontiac Vibe - FWD 2008

1. Remove the front door inside handle. Refer to Front Side Door Inside Handle Replacement .
2. Disconnect the power door lock actuator electrical connector (3), if equipped.
3. Remove the following components from the door (1):

•	The 3 screws (4)

•	The door lock (5) with the cables (2) attached.

1. Install the door lock (5) to the door (1).

Notice: Refer to Fastener Notice in the Preface section.

2. Secure the door lock with the 3 screws (4).

Tighten
Tighten the screws to 5 N·m (43 lb in).

3. Connect the power door lock actuator electrical connector (3), if equipped.
4. Install the front door inside handle. Refer to Front Side Door Inside Handle Replacement .