Front Upper Speaker Replacement for Saab 9-7x 2008

1. Remove the trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .




Important: Ensure that the speaker electrical connector does not fall into the speaker opening.

2. Remove the 3 screws that retain the speaker to the instrument panel (I/P) substrate.
3. Disconnect the speaker electrical connector.
4. Remove the speaker from the I/P.

1. Install the speaker to the I/P.
2. Connect the speaker electrical connector.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the 3 speaker retaining screws.

Tighten
Tighten the screws to 2 N·m (18 lb in).




4. Install the trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .