For 1990-2009 cars only

Makes 🢒 Saab 🢒 2008 🢒 9-7x 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Electronic Brake Control Module Programming and Setup

Electronic Brake Control Module Programming and Setup for Saab 9-7x 2008

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:

•	EBCM Reprogramming--Refer to Service Programming System (SPS) .

•	Revise the tire calibration using the Scan Tool Tire Size calibration function.

If the EBCM needs to be reprogrammed, refer to Service Programming System (SPS) .

Replace the EBCM after replacing the yaw rate sensor/lateral accelerometer, and reprogram EBCM.

•	EBCM Reprogramming--Refer to Service Programming System (SPS) .

•	Revise the tire calibration using the Scan Tool Tire Size calibration function.