GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 Astra 🢒 HVAC 🢒 Heating, Ventilation, and Air Conditioning 🢒 Accelerator Pedal Position Sensor Replacement

Accelerator Pedal Position Sensor Replacement for Saturn Astra 2008

Removal Procedure
  1. Open the driver door.
  2. Remove the instrument panel (I/P) insulator panel. Refer to Instrument Panel Insulator Panel Replacement .

    3. Object Number: 1948686 Size: LH
  3. Disconnect the wiring harness plug (1).

    4. Remove the wiring harness plug in the direction of the arrow.

  4. Remove the accelerator pedal position sensor.

    5. Remove and discard the 3 nuts (2).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

  1. Install the accelerator pedal position sensor.

    2. Use NEW nuts.

    Tighten
    Tighten the 3 nuts to 12 N·m (106 lb in).

  2. Install the wiring harness plug.
  3. Install the I/P insulator panel. Refer to Instrument Panel Insulator Panel Replacement .
  4. Close the driver door.