Lower Anchor Assembly Replacement - Rear No. 1 for Saturn ION 2005

1. Remove the rear seat backs. Refer to Rear Split Folding Seat Back Replacement .
2. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .



3. Disconnect the battery cable from the anchor assembly.
4. Remove the anchor assembly bolts.
5. Remove the anchor assembly from the vehicle.

1. Install the anchor assembly into the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the anchor assembly bolts.

Tighten
Tighten the bolts to 50 N·m (37 lb ft).

3. Install the battery cable fastener to the anchor assembly.
4. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .
5. Install the rear seat backs. Refer to Rear Split Folding Seat Back Replacement .