For 1990-2009 cars only
Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
Circuit/System Description
The body control module (BCM) generates the audible warning. The BCM receives audible warning requests via serial data.
Reference Information
Schematic Reference
Connector End View Reference
Description and Operation
Electrical Information Reference
Scan Tool Reference
Circuit/System Testing
- Ignition OFF, key in the ignition, open the driver door. The courtesy lamps should illuminate
- If all circuits test normal, replace the BCM.
| ⇒ | If the courtesy lamps do not illuminate, go to Courtesy Lamps Inoperative . |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for the BCM replacement, setup, and programming
