GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 VUE - FWD 🢒 Driver Information and Entertainment 🢒 Displays and Gages 🢒 Chime Always On

Chime Always On for Saturn VUE - FWD 2007

Diagnostic Instructions
    • Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.
    • Review Strategy Based Diagnosis for an overview of the diagnostic approach.
    •  Diagnostic Procedure Instructions provide an overview of each diagnostic category.

Circuit/System Description

The body control module (BCM) generates the audible warning. The BCM receives audible warning requests via serial data.

Reference Information

Schematic Reference

    •  Instrument Cluster Schematics
    •  Body Control System Schematics
    •  Radio/Navigation System Schematics

Connector End View Reference

    •  Displays and Gages Connector End Views
    •  Data Communication Connector End Views
    •  Entertainment/Communication Connector End Views

Electrical Information Reference

    •  Circuit Testing
    •  Connector Repairs
    •  Testing for Intermittent Conditions and Poor Connections
    •  Wiring Repairs

Scan Tool Reference

Scan Tool Data List

Circuit/System Testing
  1. Ignition OFF, disconnect the harness connector at the ignition key alarm switch
  2. Ignition ON, verify the scan tool Key In Ignition parameter is No.
    3. ⇒If not No, test the key in ignition signal circuit for a short to ground. If the circuit tests normal, replace the BCM.
  3. If all circuits test normal, test or replace the ignition switch.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

    •  Ignition and Start Switch Replacement
    •  Control Module References for BCM replacement, setup, and programming