Camshaft Position Sensor Replacement - Intake for Saturn VUE - FWD 2009

1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.
2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement.



3. Disconnect the engine wiring harness electrical connector (1) from the intake camshaft position (CMP) sensor.



4. Remove the intake CMP sensor bolt.
5. Remove the intake CMP sensor.

Note: Inspect the intake CMP sensor for damage, replace as necessary.

1. Lubricate the intake CMP sensor O-ring seal with clean engine oil.
2. Install the intake CMP sensor.

Caution: Refer to Fastener Caution in the Preface section.

3. Install the intake CMP sensor bolt.

Tighten
Tighten the bolt to 10 N·m (89 lb in).




4. Connect the engine wiring harness electrical connector (1) to the intake CMP sensor.
5. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement.
6. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.